32 TFKB_B-BA-e-2210
10.2.4 Percent weighing
The application <Percent weighing> allows to check the weight of a sample in
percent, based on a reference weight.
Select menu setting < unit >.
Put a reference weight which corresponds to 100 %.
at the upper display
margin
at the upper display
margin
Acknowledge by ➔ button.
Use the navigation keys to select the setting < % > and
confirm on ➔ button.
Confirm the flashing weight value of the reference weight
using ➔ button.
From now on the weight of the sample will be shown in
percent based on the reference weight
• Using button, it is possible to switch over between the enabled unit 1
and unit 2 (enabling the unit).
The required settings can also be defined quickly and conveniently by
pressing the
Determine key (without calling up the < unit > menu), see chap. 10.3.2.
To Next Page
Loading...
Need help?
General
