KERN FKB 16K0.05 User Manual

TFKB_B-BA-e-2210 29
10 Application <Weighing>
How to carry out a simple weighing and taring, please refer to chap. 8.2 or 8.4.
Further specific settings you will find in the following chapters.
Shouldn’t the application <Weighing> already be enabled, select the menu
setting < mode >  < weih >, see chap. 9
10.1 Application-specific settings
Call up menu:
 Press the TARE key and hold it until< apcmen > is displayed.
 The display changes to <wghmod > followed by <Ptare >.
 Navigation in menu see chap. 13.1
Overview:
Level 1
Level 2
Level 3
Description / Chapter
Ptare
PRE-TARE
actuAl
Take over the placed weight as PRE-TARE value,
see chap. 10.2.1
manuAl
Numerical input of the tare weight, see chap.
10.2.2.
CLEAR
Delete PRE-TARE value
hold
-
Start-Hold function, see chap. 10.2.3
Unit
Units
available
weighing units,
see chap. 1
This function defines in which weighing unit the
result will be displayed.
FFA
Multiplication factor see chap. 10.2.5
Pcs
Application unit counting
%
Application unit for determining percentages
see chap. 10.2.4
mode
Application mode
weig h
Weighing mode
see chap. 9.
count
Counting mode
check
Check mode

KERN FKB 16K0.05 Specifications

General

Brand	KERN
Model	FKB 16K0.05
Category	Scales
Language	English