KERN FKB 16K0.05 User Manual

44 TFKB_B-BA-e-2210
 Use the navigation keys  to select setting < limlow >.


 Press ➔ button to confirm, the numeric input window for
entering the lower limit value will appear. The active digit is
flashing.
 Enter lower limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limlow > menu.
 Press repeatedly  button to exit menu.
Finished the setting works, the weighing balance will be ready
for checkweighing.
2. Start tolerance check:
 Place the weighed material and check by means of the tolerance marks / acoustic
signal if the weighed material is within the defined tolerance.
Load below specified
tolerance
Load within specified
tolerance
Load exceeds specified
tolerance

KERN FKB 16K0.05 Specifications

General

Category	Scales
Capacity	16 kg
Readability	0.05 g
Linearity	±0.1 g
Interface	RS-232
Calibration	External calibration
Material	Stainless steel
Reproducibility	0.05 g