Kia Rio 2008 - License Plate Light Bulb Replacement; Rear Combination Light Bulb Replacement

Maintenance
427
License plate light bulb replace-
ment
1. Remove the lens.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb.
4. Reinstall the lens securely.
Rear combination light bulb
replacement
(1) Rear turn signal light
(2) Back-up light
(3) Stop and tail light
1. Open the trunk lid or rear hatch.
2. 4 Door
Remove the service cover by turning
the plastic screw counterclockwise and
removing the cover.
5 Door
Loosen the light assembly retaining
screws with a cross-tip screwdriver.
Remove the rear combination light
assembly from the body of the vehicle.
1JBA7026
1JBA7028
1JBA7042
4 Door
5 Door
1JBB6017
1JBB6017A
4 Door
5 Door