Kioti NX6010 User Manual

8
-
4
NX4510/NX5010/NX5510/NX6010
1. Check the tire air pressure and
inate the tires if they are low.
2. Install a fully charged battery.
3. Check the fan belt tension.
4. Check all uid levels. (Engine oil,
transmission/hydraulic oil, engine
coolant and any attached imple-
ments.)
5. Remove grease from the ex-
posed cylinder rod.
6. Apply grease to the lubrication
points.
7. Remove the cover from the ex-
haust pipe.
8. Depress the clutch pedal and
disengage the latch hook.
9. Get onto the tractor and start the
engine.
10. Check if the instrument panel
and all parts operate correctly
while running the engine for a
few minutes.
USING TRACTOR AFTER STORAGE
11. Drive the tractor outside and
check if it is operating properly.
Park the tractor outside and idle
engine for at least 5 minutes.
Stop the engine and visually in-
spect the tractor. Check if there
is leakage.
12. Start the engine, release the
parking brake, and check the
brake condition while driving for-
ward. Adjust the brake pedals if
necessary.
13. Stop the engine and check for
leakage. Repair any part as re-
quired.

If the battery is not to be re-
moved, disconnect its nega-
tive terminal at least. The wir-
ing can be gnawed by rodents,
leading to a re.
CAUTION
To avoid injury:

Never clean the tractor body
while the engine is running.

Never run the engine in an en-
closed area without proper venti-
lation system in order to prevent
poisoning by exhaust gas.

When storing the tractor, re-
move the key from the switch
and store it separately in order
to prevent an unauthorized
pers on from operating the
tractor and being injured.
CAUTION

When washing the tractor, be
sure to stop the engine. Allow
sufficient time for the engine
to cool before washing.

Cover the tractor a fter the
muffler and the engine have
cooled down.
IMPORTANT
TE120(NX4510,5010,5510)CABIN,ROP4 4 2013-11-05 오후 4:31:01

Kioti NX6010 Specifications

General

Brand	Kioti
Model	NX6010
Category	Tractor
Language	English