LOW SPEED INDICATOR SWITCH
(IF EQUIPPED)
(1) Low Speed Indication Switch
TE1O4B7A
When driving the tractor after sunset, be
sure to turn on the low speed indicator.
ing arm (or Implement) is lifted by
the position control lever.
2. PTO Manual
When the PTO selection switch is
put to the manual operation posi-
tion, the PTO is operated regard-
less of the height of the lifting arm
(Implement).
3. PTO ON/OFF
When engaging the PTO, press
the upper part of the switch (2).
The mark "▲" on the tachometer
indicates 540 rpm of the PTO.
•
NOTE
When engaging the PTO, low-
er the engine speed, engage
the PTO, and then accelerate
the tractor gradually in order
to prevent impact load to the
PTO from abrupt operation.
•
IMPORTANT
When disengaging it, press the
lower part of the switch (2).
[ROPS]
TE1O4C7A
(1) PTO Auto / Manual Selection Switch
(2) PTO ON/OFF Switch (A) Automatic
(B) Manual (C) O
N (D) OFF
To Next Page
Loading...
Need help?
General
