Kobalt KPS 80-06 User Manual

kobalttools.com
15
CARE AND MAINTENANCE
• To replace the bar and chain, loop the chain over the
sprocket and place the bar against the bar stud slot.
• Ensure that the chain tensioning pin is located in the
tensioning hole on the chain bar.
• Also ensure that the rubber block and chain bar are
free of oil, as this helps to keep tension on the chain.
• Replace the side cover and lock knob, but do not
fully tighten.
Bar Stud Slot
Sprocket
Chain
Tensioning Pin

Kobalt KPS 80-06 Specifications

General

Brand	Kobalt
Model	KPS 80-06
Category	Power Tool
Language	English