Kobalt KPS 80-06 User Manual

kobalttools.com
9
A
H
ASSEMBLY INSTRUCTIONS
Connecting the poles
Before using the pole saw, assembly is required. When
removed from the box, there are three parts.
• Remove packaging material and discard.
• Insert the extension pole (B) into the handle pole
(A) and slide together.
• Lower the collar (H) on the extension pole (B) to
the threaded base on the handle pole (A) and
rotate clockwise to secure.
• Repeat this process to attach the extension pole
(B) to the power head pole (C).
B
C
WARNING
• Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufcient to inict serious injury.
• Always wear safety goggles or safety glasses with side shields when operating power tools.
Failure to do so could result in objects being thrown into your eyes, resulting in possible serious
injury.
• Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
• Failure to lock power head pole as directed above could result in serious injury or death.
Adding bar and chain lubricant
Use a bar and chain lubricant (not included) with this
product. It is designed for chains and chain oilers,
and is formulated to perform over a wide temperature
range with no dilution required.
Note: This pole saw comes from the factory with no
bar and chain oil added. Level should also be checked
after every 20 minutes of use and relled as needed.
• Remove oil cap (F).
• Carefully pour the bar and chain oil into the tank.
• Wipe off excess oil. Replace oil cap (F).
• Check and ll the oil tank when quick view oil indicator
is below the second to last indicator line.
• Repeat as needed.
N
I
A
H
C
T
N
A
C
I
R
B
U
L
F
Oil
Indicator
Note: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the bar or chain.
Note: It is normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank
after each use, then run for one minute. When storing the unit for a long period of time (three months
or longer), be sure the chain is lightly lubricated; this will prevent rust on the chain and bar sprocket.
To preserve natural resources, please recycle or dispose of oil properly. Consult your local waste
authority for information regarding available recycling and/disposal options.
IMPORTANT
OPERATING INSTRUCTIONS

Kobalt KPS 80-06 Specifications

General

Brand	Kobalt
Model	KPS 80-06
Category	Power Tool
Language	English