kobalttools.com
7
SAFETY INFORMATION
• Use extreme caution when cutting small sized brush and saplings because slender material may
catch the saw chain and be whipped toward you or pull you off balance.
• When cutting a limb that is under tension, be alert for spring back so that you will not be struck
when tension in wood bers are released.
• To avoid accidental starting, never carry a battery operated product with your nger on the switch.
Be sure switch is off when inserting the battery.
• Maintain product with care. Keep cutting edge sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating and changing accessories. Inspect battery
periodically and, if damaged, have it replaced. Keep handles dry, clean, and free from oil and
grease.
• Check for damaged parts. Before further use of the product, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorized service center unless indicated
elsewhere in this manual.
• Remove the battery from pole saw when not in use, before servicing, and when changing
accessories.
• Service on the product must be performed by qualied repair personnel only. Service or
maintenance performed by unqualied personnel could result in injury to the user or damage to the
product.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this
product. If you loan someone this product, loan them these instructions also to prevent misuse of
the product and possible injury.
Service
Servicing requires extreme care and knowledge and should be performed only by a qualied service
technician. For service, we suggest you return the product to your nearest authorized service center
for repair. When servicing, use only identical replacement parts.
PREPARATION
Before beginning to assemble the product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Helpful Tools (not included): Phillips screwdriver for tightening the chain.
To Next Page
Loading...
Need help?
General
