kobalttools.com
5
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with
this product.
Save these Instructions
SAFETY INFORMATION
Read and understand all instructions. Failure to follow all instructions listed below may result in
electric shock, re, and/or serious personal injury.
• For safe operation, read and understand all instructions before using this product. Be familiar
with all controls and proper use of the machine. Follow all safety instructions. Failure to follow
all safety instructions listed below can result in serious personal injury.
• Do not allow children or untrained individuals to use this unit.
• Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.
• Wear safety glasses or goggles that are marked as complying with ANSI Z87.1 standard as
well as head protection when operating this product.
• Dress properly. Wear heavy long pants, boots, and gloves. Do not wear loose tting clothing,
short pants, or go barefoot. Do not wear jewelry of any kind.
• Secure long hair above shoulder level to prevent entanglement in moving parts.
• Keep all bystanders, children, and pets at least 50 ft. (15 m) away.
• Stay Alert — Watch what you are doing; use common sense. Do not operate this unit when you are
tired, ill, or under the inuence of alcohol, drugs, or medication.
• Do not operate in poor lighting.
WARNING
SYMBOL SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
• To avoid serious personal injury, do not attempt to use this product until you have read this
Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner’s Manual, do not use this product. Call 1-888-356-2258 for assistance.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and, when needed, a full face shield. We
recommend a wide vision safety mask for use over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
WARNING
To Next Page
Loading...
Need help?
General
