26
Chapter 5
On Mac OS X:
1 Double-click the operating drive for your system.
2 Select Library, then select Printers.
3 Open the Kodak folder, then double-click Kodak PD6000 Uninstaller.
Follow the on-screen instructions.
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came
with your Kodak EasyShare camera. To purchase one separately, see a retail
dealer of Kodak products or visit www.kodak.com/go/printerdock.
CAUTION:
Make sure your camera is NOT in the printer dock when
you are connecting to the computer.
1 Make sure the power is connected to the printer dock (see Connecting the
Power, page 5), and the Kodak EasyShare printer dock 6000 software is
installed on the computer (see Installing the Software, page 24).
2 Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3 Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.
4 Route the cable through the channel located
on the underside of the printer dock, so that
the cable does not interfere with the paper
path.
urg_00041.book Page 26 Monday, August 18, 2003 10:02 AM
To Next Page
Loading...
Need help?
General