8
To turn the projector on or o, hold the power button on the side for three (3) seconds. Once powered
on, tap the power button lightly to display the remaining battery percentage on the screen.
12. POWERING THE PROJECTOR ON/OFF
10. USING THE PROJECTOR TO CHARGE DEVICES
While the projector does include two (2) built-in speakers for regular use, you can also connect either
headphones or a portable speaker to the 3.5 mm AUDIO OUT jack as shown in the below image.
11. USING THE AUDIO OUT JACK
NOTE: External speakers can also be connected
to the projector via Bluetooth.
NOTE: The projector can also be turned on or o with the
remote control by pressing the POWER button.
To Next Page
Loading...
Need help?
General
