10
ENGINE IDENTIFICATION
Model Identification
An identification placard is affixed to the engine. The label contains the engine
family number and a model, which identifies the engine from other KEM engines.
The engine model number and serial number are required when seeking
information concerning the engine and/or ordering replacement service parts.
This manual covers the 2.4L 4.3L 5.7L 6.0L and the 6.2L LS3 Marine Engines.
Fill in the information from your engine in the above representation of the engine
tag for future reference.
MODEL: This is the part number for the engine, and this number should be
recorded for ease of obtaining information or parts for this engine.
SERIAL NUMBER: This number identifies each individual engine. This number
should also be recorded for the ease of obtaining information for this engine. If you
have a request or need to order service parts, this serial number will be requested
to aid our parts dept in fulfilling your order. The serial number will confirm that you
are ordering the correct parts for your engine.
WARRANTY CARD: The warranty card shipped with your engine must be
filled out and returned to KEM within 30 days of receipt of your new vessel.
This warranty card will also need to be filled out and returned if a re-power is
being performed with a new Kodiak engine. Failure to fill out and return your
warranty card to KEM within this time period can void all warranties related
to this engine. This warranty card also helps to identify your engine and its
related parts.
To Next Page
Loading...
Need help?
General
