EasyManuals Logo
Home>Kodiak>Engine>LS3

Kodiak LS3 User Manual

Kodiak LS3
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
WARNING: Use extreme care when changing the fuel filter. Gasoline is
highly flammable and under pressure. It should not be exposed to open
flame, sparks, or hot engine components. Allow the engine to cool to
ambient temperature prior to changing fuel filters.
WARNING: Fuel is under HIGH pressure, consult dealer before
servicing fuel system.
WARNING: The bilge can accumulate explosive fumes. The bilge
blower will evacuate the fumes. The bilge blower must be run for a minimum
of 10 minutes prior to cranking the engine.
• Check fuel tank level.
• See clear flood mode on page 18
• Check for signs of fuel leaks.
• Check fuel lines.
• Check fuel pressure.
• Inspect for crimps, kinks, blockage or any disconnected lines.
• Inspect for any leakage (leaks may allow air in the lines blocking fuel flow.)
• Follow and repair any leaks before continuing.
• Contact your service dealer for more advanced diagnosis
• Check fuel pressure (service dealer)
• Clean up any fuel spills or leaks prior to attempting to start the engine.
Engine Runs Hot
WARNING: Never remove the radiator cap under any condition while
the engine is operating. Failure to follow these instructions could result in
damage to the cooling system, engine, or cause personal injury.
WARNING: The bilge can accumulate explosive fumes. The bilge
blower will evacuate the fumes. The bilge blower must be run for a minimum
of 10 minutes prior to cranking the engine.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kodiak LS3 and is the answer not in the manual?

Kodiak LS3 Specifications

General IconGeneral
BrandKodiak
ModelLS3
CategoryEngine
LanguageEnglish

Related product manuals