EasyManuals Logo
Home>Kohler>Marine Equipment>3.5EFOZ

Kohler 3.5EFOZ User Manual

Kohler 3.5EFOZ
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
TP-6137 5/0318 Section 4 Intake and Exhaust System
4.2 Exhaust System
Carbon monoxide.
Can cause severe nausea,
fainting, or death.
The exhaust system must be
leakproof and routinely inspected.
WARNING
Inspecting the exhaust system. Carbon monoxide can
cause severe nausea, fainting, or death. For the safety of
the craft’s occupants, install a carbon monoxide detector.
Consult the boat builder or dealer for approved detector
location and installation. Inspect the detector before each
generator set use. In addition to routine exhaust system
inspection, test the carbon monoxide detector per the
manufacturer’s instructions and keep the detector operational
at all times.
At the interval specified in the service schedule, inspect
the exhaust system. See Section 1 for the exhaust
outlet location.
Inspection Points
Inspect the the exhaust system components (exhaust
manifold, mixing elbow, exhaust line, hose clamps,
silencer, and outlet flapper) for cracks, leaks, and
corrosion.
D Check the hoses for softness, cracks, leaks, or dents.
Replace the hoses as needed.
D Check for corroded or broken metal parts and replace
them as needed.
D Check for loose, corroded, or missing clamps.
Tighten or replace the hose clamps and/or hangers
as needed.
D Check that the exhaust outlet is unobstructed.
D Visually inspect for exhaust leaks (blowby). Check
for carbon or soot residue on exhaust components.
Carbon and soot residue indicates an exhaust leak.
Seal leaks as needed.
D Ensure that the carbon monoxide detector is (1) in the
craft, (2) functional, and (3) energized whenever the
generator set operates.
x:op:001:002
4.3 Mixing Elbow
Check the mixing elbow for carbon buildup and
corrosion inside the pipe. Clean the residual carbon
buildup with a wire brush. Inspect the exhaust manifold
flange for cracking and corrosion. The mixing elbow
combines high temperature exhaust and cooling
seawater. The mixture, when exposed to engine
vibration, makes conditions conducive to rapid
deterioration and failure if not correctly maintained. If
any damage is detected with the mixing elbow or other
exhaust components, replace the damaged components
to prevent engine exhaust (carbon monoxide) leakage.
TP-6134
1. Mixing Elbow
1
Figure 4-3 Mixing Elbow Location

Table of Contents

Other manuals for Kohler 3.5EFOZ

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kohler 3.5EFOZ and is the answer not in the manual?

Kohler 3.5EFOZ Specifications

General IconGeneral
BrandKohler
Model3.5EFOZ
CategoryMarine Equipment
LanguageEnglish

Related product manuals