Kohler 7-9EFKOZD User Manual

TP-6772 2/14b38 Section 2 Operation
2.10.5 GenSet Information
Displays generator set and controller information.
Displayed data is factory entered.
GenSet Information
GenSet ---->
Information
Cntrllr S/N:
##
Genset M/N:
##
GenSet S/N:
##
2.10.6 Gen Set Run Time
Displays the generator set’s operating record including
total run time loaded and unloaded, number of starts,
and total energy kW hours.
GenSet Run Time
GenSet ---->
Run Time
Eng Starts:
#
Eng Runtime:
##.# h
Next Maint:
##.# h
Since Maint:
## Starts
2.10.7 GenSet System
Display shows the generator set system data. Use the
values entered in this menu to help determine shutdown
values and time delays.
The programming user defines the data shown in the
GenSet System menu. It is NOT data measured by the
controller and associated sensing devices. The
programming user defines these values for purposes of
calibrating the control.
Some alternators are designed to operate at limited
voltage, frequency, or phase connections and as a result
some settings may have limited parameters.
Display for Measurement System is user selectable as
English or Metric.
Contrast display is user adjustable to help improve
digital display visibility in dimly lit rooms or in direct
sunlight.
Note: The contrast feature is a controller hardware
change and may not be available on older units
even if the firmware is updated.
GenSet System
GenSet ---->
System
System Freq:
60 Hz or 50 Hz
User Selectable -->
Meas System
English or Metric
Contrast
#####
User Selectable -->
Battery V:
## V
User Selectable -->
CAN A:
J1939, SmartCraft, or
NMEA 2000
User Selectable -->
Note: After changing the CAN A communication
setting, power off and then power on the
controller.

Kohler 7-9EFKOZD Specifications

General

Brand	Kohler
Model	7-9EFKOZD
Category	Marine Equipment
Language	English