5. Install the Mounting Plate
Nut
Insert
Bolt
Mounting Plate
Position the mounting plate over the mounting holes on the bowl.
Position the left and right inserts in the grooves on the mounting plate.
T
oilets with Threaded Mounting Holes
Insert the bolts through the inserts and thread into the mounting holes.
Do not fully tighten at this time.
Kohler Co. 9
1354689-2-D
Insert the bolts through the slot in the inserts and into the mounting holes. Choose
the slot that best aligns the seat with the front edge of the bowl.
Thread a nut onto each bolt.
Do not fully tighten at this time.
All Other Installations
NOTE:
There are two slots in each insert to help align the seat with the bowl. Only
one slot will be used on each insert.
To Next Page
Loading...
Need help?
General