Service and Repair Manual Safety
Prevent property damage
Information
The manufacturer of the machinery is responsible to design and provide a display to get the
messages and codes generated by the ECU, and to develop, document, implement, and enforce
emergency procedures to be followed in the event of accident or breakdown.
Refer to the “Electrical Installation Guideline”. (For more information see: 5 Appendix, page 272.) .
2.9.3 Safety instructions for the fuel system
DANGER
Hazards due to flammable fluids under high pressure.
When the engine is running, the fuel lines are under a constant pressure of up to
2000 bar (29,007.40 psi).
Fuel escaping under pressure can penetrate the skin or vaporize and explode when an ignition
source is present, which will result in death or serious injury.
u Never release the screws on the fuel circuit, especially between the high-pressure pump and
the injector when the engine is running.
u Before starting any task on the fuel system, ensure the build-up pressure in the circuit has been
released, and the temperature of the engine has cooled down.
u Keep the engine away from heat, sparks, open flame, or any other ignition source.
KD83V16 33525088901_2_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
55
To Next Page
Loading...
Need help?
General
