bizhub C360i/C300i/C250i 9-11
9.4 When a message appears to replace consumables or carry out cleaning
9
9.4 When a message appears to replace consumables or carry out
cleaning
A message appears indicating the time(s) that expiring consumables used in this machine should be re-
placed. Also, a message appears when the Slit Scan Glass is dirty.
Replace consumables or clean the Slit Scan Glass as instructed in the displayed message. Contact your ser-
vice representative if the messages continue to appear even after replacement or cleaning has been carried
out.
9.4.1 About Drum Unit
When it is time to replace a Drum Unit, a message appears to prompt you to contact your service represent-
ative. If the message appears, contact your service representative.
- The settings by the service representative are required to display a message about Drum Unit. By the
factory default status, this message is displayed only in some area. For details, contact your service
representative.
9.4.2 About Developing Unit
When it is time to replace a Developing Unit, a message appears to prompt you to contact your service rep-
resentative. If the message appears, contact your service representative.
- The settings by the service representative are required to display a message about Developing Unit.
By the factory default status, this message is displayed only in some area. For details, contact your ser-
vice representative.
9.4.3 About Toner Cartridge
When toner is running out in the Toner Cartridge
When it is almost time to replace a Toner Cartridge, an advanced warning message appears. Prepare a Ton-
er Cartridge for replacement based on the maintenance contract.
When it is time to replace a Toner Cartridge
When it is time to replace a Toner Cartridge, a replacement prompt message appears. Replace it based on
the maintenance contract. You can display the replacement procedure on the screen and check it.
- Do not replace a Toner Cartridge of a color that is not displayed.
To Next Page
Loading...
Need help?
General
