bizhub C360i/C300i/C250i 1-11
1.4 Regulation notices
1
Internal laser radiation
Maximum Average Radiation Power: 8.1 μW (bizhub C360i), 7.1 μW (bizhub C300i/C250i) at the laser aper-
ture of the print head unit.
Wavelength: 770-800 nm
This product employs a Class 3B laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any circumstances.
CDRH regulations
This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the
Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United
States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device
does not produce hazardous laser radiation.
The label shown on page 1-12 indicates compliance with the CDRH regulations and must be attached to la-
ser products marketed in the United States.
7WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
- This is a semiconductor laser. The maximum power of the laser diode is 25 mW and the wavelength is
770-800 nm.
For European users
7WARNING
Use of controls, adjustments or performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
- This is a semiconductor laser. The maximum power of the laser diode is 25 mW and the wavelength is
770-800 nm.
Laser Aperture of
the Print Head Unit
Print Head
To Next Page
Loading...
Need help?
General
