Kramer SL-12 User Manual

12
SL-12 - Operating the SL-12
2. At the other end, connect the Internet to a PC running Site-CTRL.
After connecting the Ethernet port, you have to install and configure it. For detailed
instructions on how to install and configure your Ethernet port, see the K-Config
Guide
4.6 Connecting the K-NET Port
The K-NET port is wired as shown in Figure 6.
Figure 6: K-NET Pinout Connection
5 Operating the SL-12
You can operate your SL-12 using:
 An RC family remote controller:
To operate your device using an RC remote controller, see the Kramer
K-Config Guide
 The optional RC-4 infrared remote control transmitter:
The RC-4 is configured via the Kramer K-Config software
To operate your device using the infrared remote controller, see the User Manual
packed with the remote controller
 A PC running Site-CTRL control software:
To operate your device using Site-CTRL, see the Site-CTRL and Web
Access Online User Guide

Kramer SL-12 Specifications

General

Brand	Kramer
Model	SL-12
Category	Controller
Language	English