4948
ENGLISH
PROBLEMS AND CORRECTIVE ACTIONS
PROBLEM CORRECTIVE ACTIONS
Operation
The machine displays a fault,
the software is frozen.
OR
Your machine has a
malfunction.
Turn off and unplug the machine, remove the filter
cartridge, wait 1 minute and restart the machine.
Press and hold the ON/OFF button for at least 3
seconds to start.
The appliance does not turn
on after pressing the ON/OFF
button (for at least 3 seconds).
Check the fuses and the power socket of your
electrical installation.
Check that the two power plugs are correctly inserted
into the socket.
A power failure has occurred
during a cycle.
The appliance resets automatically when it turns back
on.
The grinder stops while
making the drink and the bean
LED lights up.
Add beans and press start.
Grinder turns empty. The machine self-learns.
Use
The grinder makes an
abnormal noise.
Foreign bodies are surely present in the grinder.
There is water under the
appliance.
Before removing the water tank, wait 15 seconds
after the flow of coffee so that the machine finishes its
cycle correctly.
Verify that the drip tray is well positioned on the
machine. It must always be in place even when the
machine is not in use.
Verify that the drip tray is not full.
The adjustment button for the
grinding fineness is difficult
to turn.
Turn the grinding fineness adjustment button only
when the grinder is operating.
The appliance has not issued
any coffee.
An incident has been detected during its making.
The appliance is reset automatically and is ready for a
new cycle.
You have used ground coffee
instead of coffee beans.
Use your vacuum cleaner to collect the ground coffee
contained in the bean container.
Water flows from the coffee
nozzles when the machine
stops.
Automatic rinsing for cleaning the coffee nozzles and
prevent clogging.
To resume the current drink after adding beans, press "START/STOP".
Example:
– Starting a drink
– Detection of a lack of beans: warning light (V), alert
+ grinder stop
– Put coffee beans in the coffee bean container
– Press “START/STOP”
– Restarts the drink, which means coffee is not wasted.
Please note:
Using greasy coffee can lead to incorrect detection as the beans descend poorly.
If the detection function is activated, press the START/STOP button again to
continue making the drink.
The function can be inhibited manually (see "OTHER FUNCTIONS" - "Inhibit “no beans"
function).
To Next Page
Loading...
Need help?
General
