KRUPS Espresseria Automatic
10 Use and maintenance / SERIE EA 80xx
The appliance communicates with the user
by means of five indicator lights (1, 6, 7, 9,
10). The appliance has a digital display
(21) to set the initial setting parameters
(see point 3.3).
N°
Identification Function
16
Coffee bean holder lid
Holds the coffee beans
17
Setting button
Used to set the grinding fineness of the coffee beans: fine,
medium or coarse grind
18
Grinder
Grinds the coffee beans
19
Coffee bean holder
Holds the coffee beans (max. 275 g)
20
Cleaning tablet opening
Holds the cleaning tablet
21
Digital display
Displays the setting parameters for the initial settings (see
point 3.3)
22
Maintenance cover with cup
grid
Cover open: to receive the cleaning tablets
Cover closed: warms the cups stood on it
23
Control panel Includes the setting button and knob
24
Coffee tube and handle The drink flows from here
25
Steam nozzle Production of hot water or steam to froth milk
26
Water level gauge Mechanical device to prevent overflows
27
Grid and drip tray
Collects the water from the appliance and drips during prepa-
rations
Table 1: The control panel and the coffee bean holder of the Automatic Espresseria
2.2 Display elements
Flashing or lit indicator lights indicate the following
operating conditions of the appliance:
Indicator light 1 The appliance is switched on.
Indicator light 6 The descaling programme must be
run.
Indicator light 7 The cleaning programme must be run.
Indicator light 9 The water tank must be filled.
Indicator light 10 The used coffee collector must be
emptied and/or the cleaning drawer must be cleaned.
The indicator light also lights up when the used coffee
collector or the cleaning drawer are not correctly fitted.
ON/OFF indicator light (1)
"Used coffee collector" indicator light (10)
"Water tank" indicator light (9)
"Descaling" indicator light (6)
"Cleaning indicator light (7)
To Next Page
Loading...
Need help?
General
