KRUPS Espresseria Automatic
15Use and maintenance / SERIE EA 80xx
DEUTSCH
ENGLISH
FRANCAIS
NEDER
LAN
DS
DANSK
SVENSKA
NORSK
SUOMI
ITALIANO
3.3 Initial settings
Confirming the settings
Important: The appliance must be plug-
ged in but not switched on.
Press simultaneously the Service button
(8) and the "Strong button (5).
The "water tank" indicator light (9) lights
up.
Lift the cup grid by pressing the rear to tilt
it (22).
At the front right hand side is the digital
display for the initial setting of the para-
meters.
Note: The digital display is slightly set
back in a recess.
The digital display indicates the degree of
hardness preset in the factory (i.e. 3).
Press the "Strong" button several times
to set the water hardness to the correct
value (determine the value beforehand as
described in point 3.1 of these instruc-
tions).
Press the Steam button (2).
!
!
When using the machine for the first time, you will be asked to confirm several settings. Follow
the instructions displayed on the screen.
To Next Page
Loading...
Need help?
General
