EasyManuals Logo
Home>Krups>Coffee Maker>Espresseria Automatic EA80 Series

Krups Espresseria Automatic EA80 Series User Manual

Krups Espresseria Automatic EA80 Series
Go to English
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
16
BEFORE FIRST USE
Measuring water hardness
Before using the appliance for the rst time or if you have noted a change in water hardness,
it is advisable to adapt the appliance to the observed water hardness. To determine the
water hardness, use the measuring stick included with the appliance or contact your water
supplier. The appliance will ask you for the hardness of your water on rst use.
Degree of
hardness
0
very soft
1
soft
2
moderately hard
3
hard
4
extremely
hard
° dH < 3° > 4° > 7° > 14° > 21°
° e < 3.75° > 5° > 8.75° > 17.5° > 26.25°
° f < 5.4° > 7.2° > 12.6° > 25.2° > 37.8°
Setting
machine
0 1 2 3 4
water testing: Fill a glass with water and immerse a water testing stick into it.
After 1 minute the hardness measurement will appear (moderately hard water) - Fig. 1 and 2.
Claris - aqua filter system F 088 cartridge (sold separately)
To get the best taste from your coffee and extend your appliance’s service life, we advise
you to use only the Claris - Aqua Filter System cartridge sold as an accessory.
Fig. 3 : Mechanism to memorise the month the cartridge was tted and when to replace it
(after 2 months at most).
Your appliance will give you a message telling you when to replace your Claris - Aqua
Filter System cartridge.
Putting the filter in place
To prime the cartridge correctly, follow this procedure every time you fit a cartridge.
Using for the first time : Choose the “YES” option in the “FILTER” function and follow the
instructions on the screen.
When using later or replacing the cartridge : Select the “FILTER” function using the
button : Maintenance -OK - Filter - OK - Place or change -OK - and follow the
instructions on the screen. Screw the ltering cartridge into the bottom of the water tank
using the spanner provided - Fig. 4.
Place a 0.6 L container underneath the steam nozzle. - Fig. 5.
Preparing the appliance
Pull out and ll the water tank - Fig. 6.
Put it back in place by pressing rmly and close the lid again - Fig. 7. Open the coffee bean
container lid. Add the coffee beans - Fig. 8.
Close the coffee bean container lid again - Fig. 9.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krups Espresseria Automatic EA80 Series and is the answer not in the manual?

Krups Espresseria Automatic EA80 Series Specifications

General IconGeneral
BrandKrups
ModelEspresseria Automatic EA80 Series
CategoryCoffee Maker
LanguageEnglish

Related product manuals