EasyManuals Logo
Home>Krups>Coffee Maker>XP320830

Krups XP320830 User Manual

Krups XP320830
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
6
Descale your appliance regularly, as indicated in sections A and B for the coffee and steam
functions, as this will help prolong its lifespan. The frequency of descaling depends on the
hardness of your water. Consult your water supply authority for more information.
While descaling, do not place your appliance on a marble worktop. The descaling agent
could damage it.
To help you, here is a table of reference for the frequency of descaling according to water
hardness and how often your machine is used:
DESCALING
1. The appliance
Unplug (J) before each clean and let the appliance cool down rst.
Clean the outside of the appliance with a damp sponge when you think it necessary.
Regularly clean the tank, drip tray and its grill then wipe them down.
Rinse the inside of the tank regularly.
When a ne white layer appears in the tank, descale the appliance (refer to the section
on descaling)
Do not use alcohol or solvent-based cleaning products.
After unplugging the appliance, regularly clean the head of the lter holder and the seal
(E) using a damp sponge.
Clean with a damp cloth only. Do not use detergent or abrasive products.
2. The filter holder
Using a damp cloth, regularly clean the lter holder housing in order to remove any
residual coffee that may have collected in this area.
Do not remove the seal. Do not remove the screws from the filter and filter holder.
This may only be carried out by an approved servicing centre.
To prolong the life of the ltering head seal, do not ret the lter holder if the coffee
machine will not be used for an extended period of time.
3. The drip tray
If necessary, clean the drip tray (I) and its grill (H) using water and a little mild detergent
(44-45). Rinse and dry.
CLEANING AND MAINTENANCE
IMPORTANT! If you want to make a coffee after frothing milk, you shoud turn
the thumb wheel to the espresso position and then set the selection button
to the espresso position. After few seconds, the coffee indicator will turn off.
Turn the thumb wheel to function O and wait until the coffee indicator lights up.
During this operation, if the coffee and steam indicator lights are switched on at
the same time, repeat the steps above.
IMPORTANT!
Warning! To prevent the milk from spattering, do not lift the nozzle out of the
milk when using "steam" mode.
IMPORTANT!
Warning! The steam nozzle is still hot! Be careful you do not burn yourself!
IMPORTANT! After switching off the steam function, clean the nozzle
immediately and carefully, as set out in the section: CLEANING AND
MAINTENANCE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krups XP320830 and is the answer not in the manual?

Krups XP320830 Specifications

General IconGeneral
BrandKrups
ModelXP320830
CategoryCoffee Maker
LanguageEnglish

Related product manuals