KTM 1190 RC8 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 117
700343-01
– Remove screws  and take off the shift rod.
– The length of the shift rod can be adjusted by means of the screw thread.
Guideline
Shift rod 115… 130 mm (4.53… 5.12 in)
– Loosen the counter nuts .
– Adjust the shift shaft.
Info
Make the same adjustments on both sides.
After the counter nuts have been tightened, the bearings of the shift shaft must
be central and aligned identically to each other in order to ensure freedom of
movement in the bearing shells.
At least 5 screw threads must be screwed into the seating.
– Tighten the counter nuts.

KTM 1190 RC8 Specifications

General

Engine Type	V-Twin, 4-stroke
Displacement	1195 cc
Transmission	6-speed
Cooling	Liquid cooled
Fuel Tank Capacity	16.5 liters
Rear Brakes	Single 220 mm disc, Brembo 2-piston caliper
Seat Height	805 mm
Front Suspension	WP USD Ø 43 mm
Rear Suspension	WP monoshock
Front Brakes	2 x 320 mm discs, radially mounted Brembo 4-piston calipers
Frame	Chromium-Molybdenum tubular space frame, powder-coated