6 CONTROLS 41
Info
The average fuel consumption 1 is displayed after several 100 meters of travel after
the ignition is switched on.
If the ignition was switched off for over 60 minutes, the display of the average
speed and average fuel consumption 1 is reset to 0.
Press the SET button
briefly.
Next display mode on the info display
6.13.13 Average fuel consumption 1/average fuel consumption 2 menu
401466-01
Condition
Alternative 1
• The ignition is on.
• The motorcycle is stationary.
Alternative 2
• The ignition is on.
• The motorcycle is moving.
– Press the SET button briefly and repeatedly until the desired info display appears.
In this menu, the average fuel consumption 1 in L/100 km (or L/100 miles) and the aver-
age fuel consumption 2 in km/L (or miles/L) are displayed.
Info
The average fuel consumptions 1 and 2 are displayed after several 100 meters of
travel after the ignition is switched on.
If the ignition was switched off for over 60 minutes, the display of the average fuel
consumption 1 and 2 is reset to 0.
Press the SET button
briefly.
Next display mode on the info display
To Next Page
Loading...
Need help?
General
