KTM 125 SX 2019 User Manual

14 COOLING SYSTEM
96
H01341-10
– Position the matching radiator cover ( p. 95).
The larger catch is located at the top left.
Info
Do not use both radiator covers at the same time.
K00460-10
–
Position radiator shield
3
.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
14.4 Removing the radiator cover
K00460-10
–
Remove screws
1
.
–
Remove screws
2
.
–
Take off radiator shield
3
.
– Remove the radiator cover.
–
Position radiator shield
3
.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
14.5 Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
– Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
– In the event of scalding, rinse the area affected immediately with lukewarm water.

KTM 125 SX 2019 Specifications

General

Brand	KTM
Model	125 SX 2019
Category	Motorcycle
Language	English