KTM 125 SX 2020 User Manual

6 CONTROLS
14
6.1 Clutch lever
F00009-10
Clutch lever
1
is fitted on the handlebar on the left.
The clutch is activated hydraulically and adjusts itself automati-
cally.
6.2 Hand brake lever
F00001-10
Hand brake lever
1
is fitted on the right side of the handlebar.
The front brake is engaged using the hand brake lever.
6.3 Throttle grip
F00001-11
Throttle grip
1
is fitted on the right side of the handlebar.
6.4 Kill switch
F00002-10
The kill switch
1
is fitted on the left side of the handlebar.
Possible states
• Kill switch in basic position – In this position, the ignition
circuit is closed, and the engine can be started.
• Kill switch pressed – In this position, the ignition circuit
is interrupted, a running engine stops, and a non-running
engine will not start.

KTM 125 SX 2020 Specifications

General

Engine Type	1-cylinder, 2-stroke engine
Displacement	124.8 cm³
Bore x Stroke	54 mm x 54.5 mm
Starter	Kickstarter
Transmission	6-speed
Front Brake	Disc brake
Rear Brake	Disc brake
Ground Clearance	375 mm
Seat Height	950 mm
Clutch	Wet, multi-disc clutch, Brembo hydraulics
EMS	Kokusan
Frame	Central double-cradle type, 25CrMo4 steel
Front Suspension	WP XACT-USD, Ø 48 mm
Rear Suspension	WP XACT shock absorber with linkage
Fuel Tank Capacity	7.5 liters
Fuel System	Keihin carburetor