KTM 125 SX 2020 User Manual

SERVICE WORK ON THE CHASSIS 11
49
K01149-10
Main work
–
Remove screw
1
.
–
Remove screw
2
.
– Take off the upper triple clamp with the handlebar and hang
them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
M01117-10
–
Remove O-ring
3
. Remove protective ring
4
.
– Take off the lower triple clamp with the steering stem.
– Remove the upper steering head bearing.
11.10 Installing the lower triple clamp
102146-10
Main work
– Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease ( p. 130)
– Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
1
is correctly posi-
tioned.
–
Slide on protective ring
2
and O-ring
3
.
K01150-10
– Position the upper triple clamp with the handlebar.
–
Mount screw
4
, but do not tighten yet.

KTM 125 SX 2020 Specifications

General

Brand	KTM
Model	125 SX 2020
Category	Motorcycle
Language	English