11 SERVICE SCHEDULE 80
11.3 Recommended work
Every four years
Every two years
Every year
Every 15,000 km (9,300 mi)
After 1,000 km (620 mi)
Check/clean the oil nozzle for clutch lubrication. x
○ ●
Check the swingarm bearing. x
●
Check the wheel bearing for play. x
●
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth operation. x
○ ● ● ● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect
routing. x
● ● ● ●
Check the antifreeze. x
○ ● ● ● ●
Check/rectify the fluid level of the hydraulic clutch. ( p. 104) ● ●
Change the hydraulic clutch fluid. x
● ●
Check the screws and nuts for tightness. x
○ ● ● ● ●
Change the coolant. x
●
○ One-time interval
● Periodic interval
To Next Page
Loading...
Need help?
General
