COOLING SYSTEM 16
175
K00741-10
– Stand the motorcycle upright on a horizontal surface.
–
Check the coolant level in the compensating tank
1
.
The coolant level must be between MIN and MAX.
» If the coolant level does not match the specified value:
– Correct the coolant level.
Coolant ( p. 225)
K00742-10
–
Remove the radiator cap
2
and check the coolant level in the
radiator.
The radiator must be completely filled.
» If the coolant level does not match the specified value:
– Correct the coolant level and find out the cause of the
loss.
Coolant ( p. 225)
» If you had to add more coolant than the specified amount:
> 0.20 l (> 0.21 qt.)
– Fill/bleed the cooling system. ( p. 180)
– Mount the radiator cap.
To Next Page
Loading...
Need help?
General
