KTM 250 SX-F 2005 User Manual

– Mount the pressure cap and gradually tighten the screws with the
washers and springs crosswise to 10 Nm.
Mounting the clutch cover
– Mount a new gasket and the clutch cover (do not forget the dowels).
– Turn in the screws as illustrated and tighten to 10 Nm.
– Insert the needle roller in the shaft, mount the water pump wheel
and lock ring.
– Mount the water pump cover with a new gasket and tighten the
screws to 10 Nm.
6-9
M6x55
M6x35
M6x25+Cu
M6x35
M6x25
M6x55
M6x25
M6x25
M6x20
M6x25

KTM 250 SX-F 2005 Specifications

General

Brand	KTM
Model	250 SX-F 2005
Category	Engine
Language	English