KTM 250 SX Series User Manual

3 WORK
14
Alternative 4
Battery charger XCharge-professional CH
(00029095053)
Info
Follow the instructions of the charger and the manual.
– Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Charge the battery regularly
when the motorcycle is not
in use
3 months
Finishing work
– Mount the seat. ( p. 15)
3.7 Installing the battery (All XC models)
H00386-10
Main work
– Position the battery in the battery compartment with the termi-
nals facing forward, and secure with holding bracket
1
.
Battery (HJTZ5S-FP)
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Connect positive cable
3
to the battery.
Guideline
Screw, battery termi-
nal
M5 2.5 Nm
(1.84 lbf ft)
Contact disks
A
must be mounted under screws
5
and
cable sockets
6
with the claws toward the battery termi-
nal.
–
Slide positive terminal cover
7
over the positive terminal.
–
Connect negative cable
4
to the battery.
Guideline
Screw, battery termi-
nal
M5 2.5 Nm
(1.84 lbf ft)
Finishing work
– Mount the seat. ( p. 15)

KTM 250 SX Series Specifications

General

Displacement	249 cc
Bore x Stroke	66.4 mm x 72 mm
Starter	Kickstarter
Transmission	5-speed
Front Suspension	WP XACT-USD, Ø 48 mm
Fuel Tank Capacity	7.5 liters
Ground Clearance	370 mm
Seat Height	950 mm
Engine Type	2-stroke
Fuel System	Mikuni TMX 38
Rear Suspension	WP XACT Monoshock with linkage
Front Brake	Disc brake, 260 mm
Rear Brake	Disc brake, 220 mm