KTM 300 EXC Six Days TPI 2019 User Manual

16 COOLING SYSTEM
132
400243-10
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant 1.2 l (1.3 qt.) Coolant ( p. 162)
E00904-10
–
Push protection cap
2
upward over the thermostat.
E00905-10
–
Unplug connector
3
.
–
Remove thermostat
4
with O-ring and wait until the coolant
escapes without bubbles.
–
Mount thermostat
4
with the O-ring and tighten.
Guideline
Screw, cylinder head
temperature sensor
M10x1.25 12 Nm (8.9 lbf ft)
–
Plug in connector
3
.
–
Position the protection cap
2
.
400243-10
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant ( p. 162)
E00906-10
–
Mount radiator cap
5
.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Allow the engine to warm up and cool down again.

KTM 300 EXC Six Days TPI 2019 Specifications

General

Brand	KTM
Model	300 EXC Six Days TPI 2019
Category	Motorcycle
Language	English