KTM 300 EXC Six Days TPI 2019 User Manual

6 CONTROLS
20
6.13 Indicator lamps overview (All EXC models)
E00860-01
Possible states
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
Turn signal indicator lamp flashes green – The turn
signal is switched on.
The oil level warning lamp lights up red – Oil level has
reached the MINmarking. Ride for no more than until
the remaining fuel in the tank is depleted and at the
next opportunity refuel with 2-stroke oil.
6.14 Indicator lamps overview (All XC‑W models)
E00858-01
Possible states
High beam indicator lamp – inoperative
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
The oil level warning lamp lights up red – Oil level has
reached the MINmarking. Ride for no more than until
the remaining fuel in the tank is depleted and at the
next opportunity refuel with 2-stroke oil.
6.15 Opening the filler cap
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
– Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
– Switch off the engine for refueling.
– Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
– If any fuel is spilled, wipe it off immediately.
– Observe the specifications for refueling.

KTM 300 EXC Six Days TPI 2019 Specifications

General

Brand	KTM
Model	300 EXC Six Days TPI 2019
Category	Motorcycle
Language	English