12 SERVICE WORK ON THE CHASSIS
84
12.28 Sealing the air filter box
Preparatory work
– Remove the air filter box cover. ( p. 81)
S00847-10
Main work
–
Seal the air filter box in the marked area
A
.
Finishing work
– Install the air filter box cover. ( p. 81)
12.29 Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down before performing any work on the vehicle.
E00878-10
–
Remove screws
1
.
–
Pull off the main silencer at the rubber sleeve
2
and the
spring ring from the manifold.
12.30 Installing the main silencer
E00878-11
–
Mount the main silencer with the rubber sleeve
1
and spring
ring.
–
Mount and tighten screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)