KTM 300 EXC User Manual

12 SERVICE WORK ON THE CHASSIS
64
12.13 Lubricating the steering head bearing
H02387-01
– Remove the lower triple clamp. ( p. 59)
– Install the lower triple clamp. ( p. 60)
12.14 Removing front fender
Preparatory work
– Remove the headlight mask with the headlight. ( p. 106)
V00340-10
Main work
–
Remove screws
1
.
V00341-10
–
Remove screws
2
. Take off front fender.
12.15 Installing front fender
V00341-11
Main work
–
Position front fender. Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)

KTM 300 EXC Specifications

General

Displacement	293.2 cc
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Front Brake	Disc brake
Rear Brake	Disc brake
Ground Clearance	370 mm
Seat Height	960 mm
Engine Type	2-stroke
Rear Suspension	WP Xplor PDS
Frame	Central double-cradle type 25CrMo4 steel
Fuel Tank Capacity	Approx. 9 l