KTM 350 EXC-F EU User Manual

12 SERVICE WORK ON THE CHASSIS 59
101326-10
– Position the brake caliper and mount and tighten screws 4.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft)
Loctite
®
243™
– Mount cable binder 5.
– Position the brake line, wiring harness, and clamp. Mount and tighten screws 6.
Finishing work
–
Install the front wheel. x ( p. 90)
– Refit the headlight mask with the headlight. ( p. 99)
– Check the headlight setting. ( p. 100)
12.9 Removing the fork protector x
Preparatory work
– Remove the headlight mask with the headlight. ( p. 98)
– Raise the motorcycle with the lift stand. ( p. 56)
–
Remove the front wheel. x ( p. 90)
–
Remove the fork legs. x ( p. 57)
101327-10
Main work
– Remove screws 1 on the left fork leg. Remove the fork protector upwards.
– Remove the screws on the right fork leg. Remove the fork protector upwards.
12.10 Installing the fork protector x
101327-10
Main work
– Position the fork protector on the left fork leg. Mount and tighten screws 1.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Position the fork protector on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the fork legs. x ( p. 58)
–
Install the front wheel. x ( p. 90)
– Refit the headlight mask with the headlight. ( p. 99)
– Check the headlight setting. ( p. 100)
12.11 Removing the lower triple clamp x (EXC‑F EU, EXC‑F AUS, XCF‑W)
Preparatory work
– Remove the headlight mask with the headlight. ( p. 98)
– Raise the motorcycle with the lift stand. ( p. 56)
–
Remove the front wheel. x ( p. 90)
–
Remove the fork legs. x ( p. 57)
– Remove the front fender. ( p. 66)
– Remove the handlebar cushion.

KTM 350 EXC-F EU Specifications

General

Brand	KTM
Model	350 EXC-F EU
Category	Motorcycle
Language	English