CONTROLS 12
5.9Idle speed adjusting screw
401096-10
Idle speed adjusting screw is located on the throttle valve body at the top left.
The idle speed adjusting screw has two functions.
Turning it controls the idle speed.
Pulling it out all the way raises the idle speed during a cold start.
Possible states
• RPM increase activated – Idle speed adjusting screw is pulled out all the way.
• RPM increase deactivated – Idle speed adjusting screw is pushed in all the way.
5.10Shift lever
100908-10
Shift lever is mounted on the left side of the engine.
100909-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
5.11Kick starter (XC‑F)
100910-10
The kick starter is fitted on the right side of the engine.
The upper part of the kick starter can be folded in.
Info
Before riding, fold the upper part of the kick starter toward the engine.
5.12Foot brake lever
100911-10
Foot brake lever is located in front of the right footrest.
The foot brake lever is used to activate the rear brake.
To Next Page
Loading...
Need help?
General
