KTM 390 Adventure 2020 User Manual

14 BRAKE SYSTEM
164
The ABS is a safety system that prevents locking of the wheels
when driving straight ahead or when cornering (within the limits of
physics).
Warning
Danger of accidents Driving aids can only prevent a
rollover within the physical limitations.
It is not always possible to compensate for extreme riding
situations, for example with luggage loaded with a high
center of gravity, varying road surfaces, steep descents or
full braking without disengaging the gear.
– Adapt your riding style to the road conditions and your
driving ability.
ABS has two operating modes: the Road and OffroadABS modes.
In the Road ABS mode, the ABS controls both wheels.
In ABS mode Offroad, the ABS only controls the front wheel. The
ABS warning lamp
3
flashes slowly to remind you that the
Offroad ABS mode is enabled.
Info
In the Offroad ABS mode, the rear wheel may lock and
there is a risk of falling.
The curve dependent control is only active in ABS
mode Road.

KTM 390 Adventure 2020 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Power	43 hp (32 kW) @ 9, 000 rpm
Torque	37 Nm @ 7, 000 rpm
Compression Ratio	12.6:1
Transmission	6-speed
Cooling	Liquid cooled
Rear Brake	230 mm Disc, Single-Piston Caliper
Front Tire	100/90-19
Rear Tire	130/80-17
Seat Height	855 mm
Ground Clearance	200 mm
Fuel Capacity	14.5 liters
Weight (Dry)	158 kg
Weight (Wet)	172 kg
Fuel System	Electronic Fuel Injection (EFI)
Frame	Steel trellis
Front Suspension	WP APEX 43 mm USD forks
Rear Suspension	WP APEX monoshock
Front Brake	320 mm disc, 4-piston caliper
Wheelbase	1, 430 mm