30 LIST OF SYMBOLS
276
30.1 Red symbols
Red symbols indicate an error condition that requires immediate intervention.
The oil pressure warning lamp lights up red – The oil pressure is too low. Stop immediately,
taking care not to endanger yourself or other road users in the process, and switch off the
engine.
30.2 Yellow and orange symbols
Yellow and orange symbols indicate an error condition that requires prompt intervention. Active driving aids are
also represented by yellow or orange symbols.
Malfunction indicator lamp lights up yellow – The OBD has detected a malfunction in the
vehicle electronics. Come safely to a halt, and contact an authorized KTM workshop.
The ABS warning lamp lights up yellow – Status or error messages relating to ABS. The ABS
warning lamp flashes if the ABS mode Super Moto is enabled.
TC indicator lamp lights up yellow – MTC is not enabled or is currently intervening. The TC
indicator lamp also lights up if a malfunction is detected. Contact an authorized KTM work-
shop. The TC indicator lamp flashes if MTC makes an active intervention.
The general warning lamp lights up yellow – A note/warning note on operating safety has been
detected. This is shown in addition.