KTM 390 DUKE 2021 User Manual

16 COOLING SYSTEM
198
16.4 Draining the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
– Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
– In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
– Keep coolant out of the reach of children.
– Do not allow coolant to come into contact with the skin, the eyes and clothing.
– Consult a doctor immediately if coolant is swallowed.
– Rinse the affected area immediately with plenty of water in the event of contact with the skin.
– Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
– Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
Preparatory work
– Remove the front spoiler. ( p. 134)

KTM 390 DUKE 2021 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Torque	37 Nm @ 7, 000 rpm
Transmission	6-speed
Cooling System	Liquid cooled
Frame	Steel trellis frame, powder coated
Rear Suspension	WP APEX Monoshock
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Wheelbase	1, 357 mm
Seat Height	830 mm
Ground Clearance	185 mm
Dry Weight	149 kg
Instrumentation	TFT display
Headlight	LED
Tail Light	LED
Power	32 kW (44 hp) @ 9, 000 rpm
Fuel System	Electronic Fuel Injection
Front Suspension	WP Apex 43 mm
Rear Brake	Single-piston floating caliper, brake disc
ABS	Bosch 9.1MP Two Channel ABS (Supermoto ABS)
Fuel Tank Capacity	13.4 l
Engine Type	Single-cylinder, 4-stroke, liquid-cooled
Front Brake	Four-piston radial fixed caliper, brake disc