KTM 50 SX 2020 User Manual

15 TUNING THE ENGINE
104
Guideline
1 click increases the slip
speed by
250 … 350 rpm
Info
The springs may not be pretensioned by more than
17 clicks from the stop using the adjusting screws.
Condition
If the slip speed is too high:
–
Turn adjusting screws
2
counterclockwise.
Guideline
1 click decreases the slip
speed by
250 … 350 rpm
Finishing work
–
Install the clutch cover. ( p. 104)
– Check the gear oil level. ( p. 106)
– Check the clutch setting. ( p. 102)
15.11 Installing the clutch cover
H01458-11
Main work
–
Position the clutch cover
1
with the seal ring.
–
Mount and tighten screws
2
.
Guideline
Screw, clutch cover M6 10 Nm (7.4 lbf ft)
Finishing work
– Check the gear oil level. ( p. 106)

KTM 50 SX 2020 Specifications

General

Brand	KTM
Model	50 SX 2020
Category	Motorcycle
Language	English