KTM 50 SX 2020 User Manual

11 SERVICE WORK ON THE CHASSIS
56
F02195-11
– Raise the link fork, mount and tighten the shock absorber
with screw
3
.
Guideline
Screw, bottom
shock absorber
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Mount nut
4
and tighten the fitting.
Guideline
Screw, top
shock absorber
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Attach brake line
5
to the holder.
V00280-11
(50 SX Mini)
–
Push splash protector
1
to the side.
–
Position the shock absorber with screw
2
, depending on
the desired seating height.
– Raise the link fork; position the shock absorber with
screw
3
.
V00279-11
–
Mount nut
4
and tighten the fitting.
Guideline
Screw, top
shock absorber
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Mount nut
5
and tighten the fitting.
Guideline
Screw, bottom
shock absorber
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
– Install the rear wheel. ( p. 90)
Finishing work
– Remove the motorcycle from the lift stand. ( p. 41)
11.22 Removing the seat
H00066-10
–
Open quick release
1
and raise the rear of the seat.
– Pull back the seat and remove it.

KTM 50 SX 2020 Specifications

General

Brand	KTM
Model	50 SX 2020
Category	Motorcycle
Language	English