9 SERVICE SCHEDULE
28
Every 80 operating hours
Every 40 operating hours
Every 20 operating hours
Once after 10 operating hours
Service the fork. ● ●
Perform the shock absorber service. ●
Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ● ● ●
Check the idle speed. ○ ● ● ●
Check the clutch setting. ( p. 102) ● ● ●
Final check: Check the vehicle for safe operation and take a test ride. ○ ● ● ●
Make a service entry in the KTM Dealer.net. ○ ● ● ●
○ One-time interval
● Periodic interval
9.3 Recommended work
Every 80 operating hours
Once after 20 operating hours / Every 20 operating hours
Once after 10 operating hours
every 12 months
Change the front brake fluid. ●
Change the rear brake fluid. ●
Change the rear brake fluid. ●
Service the fork. ○
Perform the shock absorber service. ○
Grease the steering head bearing. ( p. 51) ●
Check/adjust the carburetor components. ●
Perform minor engine service. Check the cylinder and piston. Check the inlet membrane.) ● ●
Perform major engine service including removing and installing engine. (Check the clutch.
Change the piston. Change the connecting rod, conrod bearing, and crank pin. Check the
transmission. Change the crankshaft bearing. Change all engine bearings.)
●
○ One-time interval
● Periodic interval
To Next Page
Loading...
Need help?
General
