KTM 65 SX 2013 User Manual

11 SERVICE WORK ON THE CHASSIS 40
601954-10
– Mount and tighten screws 2.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
601950-11
– Mount and tighten screw 3.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Position the fuel tank breather.
Final work
– Mount the seat. ( p. 35)
11.30 Removing the chain guard
100815-10
– Remove cable binder 1.
– Take off the chain guard.
11.31 Installing the chain guard
100816-10
– Position the chain guard. Mount cable binder 1.
Info
The cable binder must be run between chain sliding guard 2 and
swingarm 3.
100817-10
– Mount the cable binder at the rear.
– Align the chain guard so that screws A of the chain guide are visible.
– Tighten the cable binder and cut off the ends.

KTM 65 SX 2013 Specifications

General

Brand	KTM
Model	65 SX 2013
Category	Motorcycle
Language	English