13 WHEELS, TIRES 104
102001-01
–
Pull out wheel spindle
to the point where the chain adjuster is no longer in contact
with the adjusting screw.
– Push the rear wheel forward as far as possible and take the chain off the rear sprocket.
Info
Cover the components to protect them against damage.
– Holding the rear wheel, withdraw the wheel spindle.
Warning
Danger of accidents Reduced braking efficiency due to damaged brake disc.
– Always lay the wheel down in such a way that the brake disc is not damaged.
– Take the rear wheel out of the swingarm.
Info
Do not operate the foot brake when the rear wheel is removed.
13.4 Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
– After installing the rear wheel, always operate the foot brake until the pressure point is reached.
To Next Page
Loading...
Need help?
General
