6 CONTROLS 32
401444-01
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO display mode is active.
– Keep the MODE button pressed until the display mode changes from km/h to mph or
from mph to km/h.
6.10.8 Time
401443-11
The time is shown in area
of the display.
Info
The time must be reset after the battery was disconnected or the fuse was removed.
6.10.9 Setting the clock
Condition
The motorcycle is stationary.
To Next Page
Loading...
Need help?
General
